Snow Blower Not Working? Here is what to Do

You wake up one morning and your snow thrower isn’t working the way you expect it to. Well, you have been keeping it in the garage for the past few months and you expected it to start automatically after a successful season last winter. Calling a mechanic might take a few hours, which might mean getting to work late. This is when troubleshooting basics can come in handy and make your machine operate normally, not just for that day but subsequent ones as well. Let us explore some of the top tips for troubleshooting your blower.

Proper Choke and Throttle Usage

Your snow blower might not start when the choke and throttle aren’t positioned properly. Make sure the throttle is in a fast position when starting the blower. This position sends gasoline to the engine, failure of which the engine might not work. You only need the choke on when the snow blower has been out of use for a long time. If the blower has been running for a while and you are restarting it, turn off the choke.

Gasoline Issue

If you start the snow blower but it sputters and dies at once then you have an issue with the gasoline. Make sure you have enough gas in the tank and you are using the right type of gasoline in the tank. Using the wrong gasoline might lead to frozen gas lines, which require you to warm the blower before you start it. Remember to use the right gasoline after starting it.

Well, it is just normal that you have to store the blower till the winter. Leaving gasoline in the tank during the storage period builds up deposits in the gas line and the carburetor. To avoid this, always add a stabilizer to the gas tank before storing the blower.

Change or Clean the Spark Plugs

At times, you might get a rough start that might be disappointing and frustrating, or the performance might be below par. For instance, the blower might not produce half the power it used to. Poorly gapped or dirty spark plugs make the snow blower perform poorly or not start at all. The solution is simple – clean or replace the spark plugs

Clean and Adjust the Carburetor

The carburetor in the snow blower mixes gasoline and fuel and sends it to the spark plug to get fired. However, deposits build up in the carburetor due to repeated use, leading to poor carburetor performance. Additionally, these deposits might also block the flow of fuel. You might also have to adjust the carburetor so that the right mixture is sent to the spark plugs for firing.

To do all these, you have to remove the carburetor from the snow blower, which is a straight forward operation. Follow the advice in the user manual to do this. Clean it and readjust it before fitting it back into the snow blower for an error-free operation.

Fuel and Air Filters

The snow blower might start smoothly, but have a problem with the acceleration. The snow blower might also die off for no reason at all. When this happens, you need to suspect the fuel filter or air filter, which might be clogged. You might remove the debris, or replace them altogether.

None of The Above

Unfortunately, you might not be able to correct the problem with the snow blower at all. When this happens, you might have to consult an experienced mechanic. Get a reliable and reputable mechanic to handle the issue, making sure to get a quote before they start.

If the snow blower is getting old, the best thing to do is get a replacement than spending a lot of money on recurrent repairs. Check out Snow Shifts for an idea of the ideal replacement.

Final Words

Winter comes with its pros and cons. One of the biggest headaches for homeowners is how to deal with snow day in and day out. Having a snow blower can prove to be the difference between making it to work or an appointment on time or never leaving the house at all. Additionally, having the blower has proven to be a side hustle for many people who are looking to make that extra dollar clearing snow for pay.

Comments are closed.